ATTENTION: The keys are sent by email. If you don't receive it, check the SPAM email folder.
**Since this is an online key, returns will not be accepted once submitted.
DESCRIPTION
Epson printers equip a tank where they deposit the excess ink after each head cleaning, inside it incorporates a sponge which absorbs the residual ink. This tank, also called a maintenance box, can be replaced depending on the printer model. But there are printers that do not have a replacement for this box, therefore when the maintenance tank meter reaches its end of life, the printer will be blocked and will not be able to print.
The messages that may appear refer to the pad or some internal parts of the printer.
At this point, many users choose to ditch the printer thinking that the solution will cost more money than the value of the printer itself.
The WIC RESET program is free (WORKS UNDER WINDOWS ENVIRONMENT ONLY)and allows us to reset the ink tank counter to continue using the printer (see under the list of compatible printers). Resetting the meters requires a key which we can buy here and we will receive by email within a maximum period of 24 hours.
THE PROGRAM IS FREE OF VIRUSES, BUT SOME ANTIVIRUS MAY CONSIDER IT A THREAT SINCE IT IS AN EXECUTABLE FILE AND THEREFORE THEY WILL BLOCK IT. IF IT HAPPENS TO YOU, DISABLE THE ANTIVIRUS OR WINDOWS DEFENDER TO CARRY OUT THE PROCESS.
Once the meter has been reset, the reservoir sponge should be checked and renewed if necessary. Another option is to apply a tube to the ink ejection system to draw excess ink out of the printer.
WIC RESET also allows us to do a deep cleaning of the head. This function is completely free and does not require any password to use.
Before making the purchase, make sure that your printer is compatible and that it is detected by your computer. Below you have a list with all supported printers as well as links to download the free software.
CONTENT
1 x KEY TO RESET THE MAINTENANCE BOX COUNTER (single use) 1 x PROCEDURE INSTRUCTION MANUAL
IMPORTANT: The key will be sent by email to the address on your file within 24 hours. Please check your spam folder, if you see that it does not arrive within this period, contact us.
INSTRUCTIONS
Step 1: Download the program WIC RESETDOWNLOAD(If you have problems downloading, we leave you some instructions below) Step 2: Buy the key Step 3: Connect the printer with USB cable Step 4: Install the program. Step 5: Click on Waste Ink Counters Step 6: Select the printer in the drop-down menu and click on Read residual ink counter.. Step 7: Once the counter has been checked and that the program works well, click on Reset residual ink counter. Step 7: Enter the password and press Ok Step 8: Restart the printer.
PROBLEMS WITH DOWNLOAD AND INSTALLATION? FOLLOW THESE INSTRUCTIONS
1º Deactivate the antivirus for a few minutes.
2º When downloading the program, the browser may block it. If you use Chrome, click on the 3 dots at the top right and on the drop-down menu, click Downloads.
3º In the Download History window you will see the blocked file. Select Keep Dangerous File and then select Keep Anyway.
4º Click on Show in folder to access the program file.
5º You can proceed with the installation and execution of the program by following the instructions that you will receive in the email along with the key.
6ºDon't forget to activate all security systems at the end of the process.